User Selection Guide to ROBOND™ PS-1000 series pressure sensitive adhesives. All products are removable water-based acrylic adhesives.

ROBOND™ PS-1020
First Choice for Coated or Uncoated Metal and Other Smooth Surfaces

• Removes easily from smooth surfaces
• Excellent balance of peel, shear and tack properties
• Compliance with FDA 21 CFR 175.105

ROBOND™ PS-1031
First Choice for Extruded Profile and Glass, or Coated and Uncoated Metal Surfaces

• Excellent stability to remove easily from smooth surfaces over time
• High shear strength and temperature resistance
• Good plasticizer migration resistance
• APEO free and compliance with FDA 21 CFR 175.105

ROBOND™ PS-1040
First Choice for Extruded Profile and Glass Surfaces

• Excellent stability to remove easily from smooth surfaces over time
• Excellent balance of peel and shear properties, medium tack
• Very low peel build-up over time
• APEO free and compliance with FDA 21 CFR 175.105

ROBOND™ PS-1049
First Choice for Metal, Extruded Profiles, Plastic Sheets, Painted Surfaces and Glass

• Excellent stability to remove easily over time
• Excellent response to crosslinker
• APEO free and compliance with FDA 21 CFR 175.105

ROBOND™ PS-1067
First Choice for Textile and Carpet Protection

• Excellent stability to remove easily over time
• Good adhesion to low surface energy substrates
• APEO free and compliance with FDA 21 CFR 175.105

ROBOND™ PS-1089
First Choice for Extruded Applications Where Easy, Clean Removal is Required

• Excellent clarity and water whitening resistance
• Excellent stability of removability over time
• High cohesion
• APEO free and compliance with FDA 21 CFR 175.105

The information is presented as a user guide. Rohm and Haas recommends that users make their own determinations regarding the suitability of ROBOND™ PS-1000 series products and that users periodically verify the regulatory status of these products for intended applications.

Rohm and Haas water-dispersible isocyanate crosslinkers (CR-3 and CR-4) for aqueous acrylic systems can help to improve key adhesion to difficult substrates and improve heat and water resistance. Ask your Rohm and Haas representative for information and technical support to select the proper crosslinker for your needs.